Part Number Hot Search : 
059SP M3H75TAD IRF10 HCPL7840 RD39ES M5237 A2039 00506
Product Description
Full Text Search
 

To Download MASWSS0006TR-3000 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MASWSS0006
GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz
Features
* Low Voltage Operation: 2.5 V * Excellent Harmonics: <-67 dBc at +34 dBm & 1.0 GHz * Low Insertion Loss: 0.40 dB at 1.0 GHz * High Isolation: 20 dB at 2.0 GHz * SOT-26 Package * 0.5 micron GaAs PHEMT Process Rev. V4
Functional Schematic
PIN 1 PIN 6
RF1
V1 RFC 39 pF 100pF V2
100pF 39 pF
GND RF2
Description
M/A-COM's MASWSS0006 is a GaAs PHEMT MMIC single pole double throw (SPDT) high power switch in a low cost SOT-26 package. The MASWSS0006 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as other related handset and general purpose applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. The MASWSS0006 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability.
39 pF 100pF
Pin Configuration
Pin No.
1 2 3 4 5 6
Pin Name
RF1 GND RF2 V2 RFC V1
Description
RF Port 1 RF Ground RF Port 2 Control 2 RF Common Port Control 1
Absolute Maximum Ratings 2,3
Parameter
Input Power (0.5 - 3.0 GHz, 2.5 V Control) Voltage Operating Temperature
Absolute Maximum
+38 dBm 8.5 volts -40C to +85C -65C to +150C
Ordering Information1
Part Number
MASWSS0006 MASWSS0006TR MASWSS0006TR-3000 MASWSS0006SMB
Package
Bulk Packaging 1000 piece reel 3000 piece reel Sample Test Board
Storage Temperature
2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits.
1. Reference Application Note M513 for reel size information.
Truth Table 4,5
V1
1 0
V2
0 1
ANT- RF1
On Off
ANT - RF2
Off On
4. Differential voltage, V (state 1) - V (State 0), must be +2.5 V minimum. 5. 0 = -5 V to 2.5 V, 1 = -2.5 V to +5 V. 1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0006
GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz
Electrical Specifications: TA = 25C, VC = 0 V / 2.5 V, Z0 = 50 6
Parameter
Insertion Loss7
Rev. V4
Test Conditions
DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz DC - 2.0 GHz 2.0 - 3.0 GHz Two Tone, +26 dBm / tone, 5 MHz Spacing > 50 MHz -- 1.0 GHz, PIN = +34 dBm 1.0 GHz, PIN = +34 dBm 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF In Band
Units
dB dB dB dB dB dB dB dB dBm dBm dBc dBc uS uS mV uA
Min.
-- -- -- 23.0 17.5 -- -- -- -- -- -- -- -- -- -- --
Typ.
0.40 0.50 0.75 26 20 16 20 16 57 39 -75 -75 0.04 0.06 50 --
Max.
0.65 0.75 -- -- -- -- -- -- -- -67 -67 -- -- -- 50
Isolation
Return Loss IP3 P0.1dB 2
nd rd
Harmonic
3 Harmonic Trise, Tfall Ton, Toff Transients Gate Leakage
6. External DC blocking capacitors are required on all RF ports. 7. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 100 pF for 0.5 - 3.0 GHz.
Qualification
Qualified to M/A-COM specification REL-201, Process Flow -2.
SOT-26 Plastic Package
Handling Procedures
Please observe the following precautions to avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Meets JEDEC moisture sensitivity level 1 requirements
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0006
GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz
Typical Performance Curves vs. Temperature, 100 pF blocking capacitors
Insertion Loss vs. Frequency
1.0
+25C +85C -40C
Rev. V4
Isolation vs. Frequency
40 35 30 25 20
+25C +85C -40C
0.8
0.6
0.4
15 10
0.2
5
0.0 0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0 0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Frequency (GHz)
Frequency (GHz)
2nd Harmonic vs. Control Voltage, Pin = 34 dBm CW, 1 GHz
-60
25C -40C 85C
3rd Harmonic vs. Control Voltage, Pin = 34 dBm CW, 1 GHz
-60
25C -40C 85C
-65
-65
-70
-70
-75
-75
-80
-80
-85
-85
-90 2.0 2.5 3.0 3.5 4.0 4.5 5.0
-90 2.0 2.5 3.0 3.5 4.0 4.5 5.0
V (V)
C
V (V)
C
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.


▲Up To Search▲   

 
Price & Availability of MASWSS0006TR-3000

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X